Purchase and Simple Maintenance of Vibrating Screen

Purchase of vibrating screen

In the event that customers don’t have experience to purchase vibrating screen, the following parameters can be the basis for selection of vibrating screen.

1. Name, bulk specific gravity, viscosity and temperature of materials to be screened.

2. Expected handling capacity per hour.

3. Expected sieving mesh.

4. Granularity proportion of materials to be screened and required screening accuracy and range.

5. Acid and alkaline of materials to be screened, and health requirements.

6. The space dimensions for vibrating screen in production site.

7. If there is explosion protection and flameproof requirement in production site (Explosion-proof requirements explosion-proof type vibrating screen needs to be designed if there is explosion protection and flameproof requirement).

Based on the above criteria, vibrating screen manufacturer engineers can figure out the right kind of vibrating model, and then form solutions for you.

Simple maintenance of vibrating screen

1. Although vibrating screen doesn’t need lubricant, but major repair once a year is still needed.

2. Sieve of vibrating screen or vibration sieve should be removed on a regular basis, check if the screen is broken or uneven, and if the sieve pore is blocking.

3. Making support frame is recommended, for hanging the standby screen.

4. Periodically check the screen seal, replace in a timely manner if found worn or defective.

5. Check the sieve clamping devices before starting the vibrating screen, tighten the loose sieve clamping.

6. Check if the connection of feeding port is loose every day, the increasing gap will cause collisions, resulting in equipment breakage.

7. Check the sieve support device every day.